HP-S1
All Surfboards are Custom Made
Custom Boards are ready for collection or delivery 6 weeks after placing orders.
Our all-round "go to" performance shortboard shaped for the intermediate to advanced surfer for a wide variety of conditions.
The board starts with medium entry rocker in the nose to give you a good balance between paddling speed and performance, while the mid rails provide just the right amount of sensitivity for turning and floatation.
The single concave through the middle of the board channels water under your feet to give lift and speed, while the double concaves through to the fins and tail increase your speed and manoeuvrability.
Lastly the medium exit rocker in the rear provides both drive and release.
Nose Rocker: | Medium |
---|---|
Tail Rocker: | Medium |
Rails: | Mid |
Bottom: | Single to Double Concave |
Tails: |
Squash Round Swallow Rounded Square Rounded Pin |
Fin setup: | Thruster (3 fins) |
Fin System: | FCS II or Futures |
Blank: | Polyurethane (PU) |
Glassing: | Standard - 4oz + 4oz Deck and 4oz Bottom (other options available) |
Surfer competency: | Intermediate to Advanced surfer |
Surf conditions: | 2ft to overhead |
Price: | $695 |
The following dimensions are the Shapers standard sizes. You can order either your own preferred sizes or keep the standard sizes, through our custom order page.
* The estimated surfer weight is based on an intermediate surfer.
Length | Width | Thickness | Volume | Estimated Weight Range* |
---|---|---|---|---|
5'10" | 18 1/8" | 2 1/8" | 23.0 ltr | 60kg / 132lb or less |
6'0" | 18 1/4" | 2 3/16" | 24.6 ltr | 60 - 70kg |
6'1" | 18 3/8" | 2 1/4" | 25.9 ltr | 70kg / 154lb |
6'2" | 18 1/2" | 2 5/16" | 27.0 ltr | 70 - 75kg |
6'3" | 18 5/8" | 2 3/8" | 28.5 ltr | 75kg / 165lb |
6'4" | 18 3/4" | 2 7/16" | 29.9 ltr | 75 - 80kg |
6'5" | 19" | 2 1/2" | 31.0 ltr | 80kg / 176lb |
6'6" | 19 1/4" | 2 1/2" | 32.4 ltr | 80 - 85kg |